Orifice Tube Tool

Related Clutch Alignments Tools Products

• Lisle 41800 Fan Clutch Wrench Set for Ford - 4 Piece
  
  This wrench set removes and installs Ford fan clutches when repairing or replacing the water pump, timing chain or the fan clutch. Set includes two holding wrenches and two open-end wrenches. The double-ended wrench and small holding wrench work on 2.8, 2.9, 3.0, 4.0 and 4.9 liter engines.

  • Removes fan clutch on most Ford vehicles
  • Comes in box
• Dorman 14527 HELP! Clutch Alignment Tool
  
  Motormite 14527 Clutch Alignment Tool
• Dorman 14520 HELP! Clutch Alignment Tool
  
  Motormite 14520 Clutch Alignment Tool
• Dorman HELP! 14522 Clutch Alignment Tool
  
  Motormite 14522 Clutch Alignment Tool

  • Help 14522 Clutch Pilot Tool
  • Genuine Help Part
• ACT AT03 Clutch Alignment Tool
  
  CLUTCH ALIGNMENT TOOL

  • CLUTCH ALIGNMENT TOOL
• ACT ATK73 Clutch Alignment Tool
  
  CLUTCH ALIGNMENT TOOL

  • CLUTCH ALIGNMENT TOOL
• Lisle 11750 Clutch Coupling Remover for Ford
  
  Easily disengages the hydraulic clutch line from the clutch slave cylinder on some Ford manual transmissions. Tool prongs fit around clutch line above nylon sleeve. For 1989 and newer Mercury Cougars and Thunderbirds; 1988 and newer small trucks including Explorer, Ranger and Bronco II.

  • Disconnects Ford hydraulic clutch lines
  • Comes in skin-pack
• K-D Tools 2416 Cltch Plate Removr&Instlr
  
  Features: Tool removes and installs clutches on GM air conditioning compressors. Remove clutch plate without removing retaining ring and install clutch plate with compressor on car. Use it on all A-6 and pre-1980 R-4 compressors. Tool will not work on metric threads.

  • Sold Individually
• OTC 5035 Truck Clutch Adjusment Gauge Set
  
  The gauges in this set enable you to check the adjustment of pull-type, heavy-duty clutches, ensuring their correct operation. One gauge checks the amount of free play between the yoke and the bearings wear pad.

  • Sold Individually
• OTC 7074A 2" O.D. Truck Clutch Alignment Tool
  
  2 O.D., 1-1/4 pilot. Constructed of a lightweight fiberglass-reinforced nylon body that wont hang up in the clutch disc splines. Designed for perfect fit to the spline of the clutch disc and easily supports heavy pressure plates.

  • Sold Individually
• Clutch Aligning Tool Set
  
  Features and Benefits:Aligns single disc clutches on American and imported cars, light trucks, and tractorsAdapter fits through clutch plate and into pilot bushing or bearingTapered cone fits into clutch hole and aligns clutch plate properlyIncludes shaft and eight two-stepped pilot bearing adapters...
• OTC 5044 Self-Adjusting Clutch Rotating Tool
  
  Replaces self-adjuster mechanism on Spicer self-adjust clutches.

  • Sold Individually
• Clutch Aligning Shaft - 1 3/4 In OD - 1 In Pilot
  
  Clutch Aligning Shaft - 1 3/4 In OD - 1 In PilotFeatures: These truck clutch tools are available in the three most popular sizes: 1 1/2", 1 3/4", & 2" 0.D. 10-spline shafts. Each tool is constructed of a lightweight fiberglass reinforced nylon body that won`t hang up in the clutch disc splines.
• ACT Clutch Alignment Tool for 1992 - 1995 Honda Civic
  
  CLUTCH ALIGNMENT TOOL

  • 1992 - 1995 Honda Civic 1.5L, 4 Cylinder, Gas, MFI, EG8, D15B7 - DX
• ACT Clutch Alignment Tool for 1979 - 1980 Toyota Supra
  
  CLUTCH ALIGNMENT TOOL

  • 1979 - 1980 Toyota Supra 2.6L, 6 Cylinder, Gas, MFI, VIN "M", 4ME - Supra
• ACT Clutch Alignment Tool for 2004 - 2005 Subaru Impreza
  
  CLUTCH ALIGNMENT TOOL

  • 2004 - 2005 Subaru Impreza 2.5L, 4 Cylinder Turbo, Gas, MFI, EJ257 - WRX STI
• Centerforce Clutch Alignment Tool for 2000 - 2003 Honda S2000
  
  ALIGNMENT TOOL -- MAKES IT EASIER TO INSTALL TRANSMISSION BACK IN VEHICLE

  • 2000 - 2003 Honda S2000 2.0L S-2000 - VTEC
• Unorthodox 070931216 Sport Pro Sprung 6 Puck Clutch Kits
  
  (3.0L DOHC 24V Includes pressure plate, disc, bearing/s alignment tool) Built for the (03-04) Mitsubishi 3G Eclipse... These 6 puck Ceramic kits use a specially blended ceramic puck with a sprung hub. The disc is matched heavy duty pressure plate, release, pilot bearing and alignment tool.

  • 3.0L DOHC 24V Includes pressure plate, disc, bearing/s alignment tool
  • Mitsubishi 3G Eclipse (03-04)
• KD Tools 2420 Clutch Aligning Tool Set
  
  Aligns single disc clutches on American and imported cars, light trucks, and tractors Plate aligning cone has 1-1/8” maximum diameter taper Includes Zinc adapters for Import: 0.472" and 0.500"; 0.622" and 0.641"; 0.688" and 0.710"; 0.826" and 0.875" Black adapters for domestic: 0.561" and 0.590"; 0...

  • Aligns single disc clutches on American and imported cars, light trucks, and tractors
  • Plate aligning cone has 1-1/8 maximum diameter taper
• T&E Tools Heavy Duty Truck Clutch Service Kit Model J7010
  
  Set includes 9 different clutch service tools that allow you to perform clutch installation and removal includes: Self Adjust Clutch Rotating Ring Flywheel Drive Pin installing Tool Clutch Release Tool Adjusting Wrench Clutch Alignment Tool 1 3/4" Clutch Alignment Tool 2" pair of 3/8" guide ...

  • Set includes 9 different clutch service tools that allow you to perform clutch installation and removal
• Luk 5324 Automotive Clutch Alignment Tool
  
  Luk 5324 Automotive Clutch Alignment Tool

  • Fully Warranted
  • Ready to Install
• Luk 5359 Automotive Clutch Alignment Tool
  
  Luk 5359 Automotive Clutch Alignment Tool

  • Fully Warranted
  • Ready to Install
• Pioneer CA-91 Clutch Adjuster
  
  Pioneer CA-91 Clutch Adjuster
• Clutch Holding Tool
  
  Clutch Holding Tool

  • This tool prevents the clutch plate from turning when moving the shaft nut. The adjustable three stud design is meant for GM R-4 compressors, but the wrench will also fit other GM, Pitts, Warner, and Ogura clutches.
• Clutch Shoe Tool
  
  Item 27002: OEM A/C Clutch Plate Remover Shoe Tool. . Clutch plate remover tool for GM A6 and R4 compressor clutches

  • Clutch plate remover tool for GM A6 and R4 compressor clutches
• Orifice Tube Tool
  
  Item 27004: OEM A/C Orifice Tube Tool. . This handy tool easily removes/installs the orifice tubes from the inlet of the AC evaporator on most GM and Ford models.

  • This handy tool easily removes/installs the orifice tubes from the inlet of the AC evaporator on most GM and Ford models.