Fuel Tank Adapter for ATD Transmission Jacks ATD 7470

Related Towing Products & Winches Products

• WARN 9790 Standard Manual Hub Kit
  
  These manual hubs are designed for OEM hub replacement. They feature a precision cast body, 4140 steel clutch ring, and inner drive gear. Installation is quick and easy and sure turn dials make for easy engagement. For use with 19 spline axles.

  • Designed for OEM hub replacement
  • Precision cast body with inner drive gear and 4140 steel clutch ring
• Valley 51750 Chrome Adapt Hitch Ball Set
  
  Valley Adapt Hitch Ball Set comes with two balls measuring 1-7/8 inch and 2 inch in diameter. The shank measures 3/4 inch in diameter and is 2-3/16 inch long. The maximum gross load capacity of this hitch ball is 5,000 pounds.

  • Chrome-plated finish
  • Ball sizes can be changed without removing the shaft
• Master Lock 1491DAT Trailer Coupler Pivot Lock Latch Pin
  
  Master Lock Trailer Coupler Pivot Lock Latch Pin secures coupler latch from opening during use. This trailer coupler includes stainless steel blade, 6" cable and attachment ring.

  • Secures couplet latch from opening during use
  • Stainless Steel blade
• Master Lock 2857DATSC Standard Hitch Ball
  
  Master Lock Standard Hitch Ball is designed to provide safer towing facility. It is made from solid steel and is chrome plated which offer long lasting life. This ball is corrosion resistant and withstands all weather condition. It is easy to install and is backed by a limited lifetime warranty.

  • Designed to provide safer towing facility
  • Made from solid steel
• Curt Manufacturing 40044 Hitch Ball, 2 5/16 In X 1 1/4 In X 2 1/4 In X 2
  
  Curt Manufacturing A-44 HITCH BALL, 2 5/16 IN X 1 1/4 IN X 2 1/4 IN X 2 IN .

  • CURT Hitch balls have a high quality finish and fine threads for more holding power.
  • Available in 3 finishes. Choose from Durable attractive nickel chrome, stainless steel or a raw finish
• Torin High-Position Jack Stand - 3/4-Ton, Model# TRF40753A
  
  Tall underhoist stand has a foot pedal pump to move loads into position quickly. Wide top saddle and wide bottom base for load stability. Lift Capacity (tons): 3/4, Min. Lift Height (in.): 53 5/16, Max. Lift Height (in.): 79 29/32, Double Locking: No, Base L x W (in.): 12 x 12
• Curt Manufacturing 14361 Class IV Receiver
  
  All CURT hitches feature WeatherTite construction, which prevents rusting from the inside out by sealing the main body of the hitch. The receiver tube has an open back end to allow for easy cleaning and for dirt and moisture to pass through and not get trapped as is common with other brands of hitch...

  • 2" Heavy Duty Receiver Tube Opening
  • Gross Trailer Weights (GTW) and Tongue Weights (TW) vary by application
• Advanced Tool Design Model ATD-7530 600 Lb. Engine Lifting Sling
  
  Ideal for engine removal or installation. Bolts to motor mounting holes. Working load limit 600 lbs.

  • Working load limit 600 lbs.
• WARN 26081 Winching Accessory Bag
  
  Warn Industries Winching Accessory Bag is a red Cordura nylon soft case that is designed to hold winching accessories. This heavy duty accessory bag keeps the accessories organized.

  • Designed to hold winching accessories
  • Heavy-duty
• Strap Winder (Single)
  
  This strap winder is a must have for anyone using winch straps to tie down their cargo for hauling. The unit easily attaches to any standard side rail. Use the strap winder to wind up any excess webbing when securing your winch strap to the winch.

  • Easy attachment
  • Durable black finish
• Curt Manufacturing 14211 Class IV Receiver
  
  Curt Manufacturing Class IV Receiver feature WeatherTite construction, which prevents rusting from the inside out by sealing the main body of the hitch. The receiver tube has an open back end to allow for easy cleaning and for dirt and moisture to pass through and not get trapped as is common with o...

  • 2 inch receiver tube opening
  • Gross trailer weights (GTW) and tongue weights (TW) vary by application
• Reese 66542 WD High Performance 1200 with Hitch Bar Trunnion
  
  1200# ADJ. HIGH-PERFORMAN

  • 1200# ADJ. HIGH-PERFORMAN
• WARN 72568 Winch Remote Control
  
  Winch Remote Control; For Use With All WARN Winches Except 9.5ti; 9.5si; 16.5ti; - Next Generation Of Winch Remote Controls Incorporates An Improved Ergonomic Design Intuitive Features WARN S2 Smart Sense Elements

  • Intuitive Features
  • Next Generation Of Winch Remote Controls
• Reese 66155 WD SC 1200 with Built In Sway Trunnion
  
  REESESC1200#WDKIT

  • REESESC1200#WDKIT
• 12" Receiver Tube/Tow Bar
  
  Square tube for weld-on, 12" unfinished Receiver tube

  • Square Tube Hole: 2" x 2"
  • Length: 12"
• Champion Power Equipment 18001 8000-lb Power Winch Kit
  
  Champion Power Equipment 8000-lb Power Winch Kit is designed to facilitate efficient towing. It has a reduction planetary gear system ratio of 294:1 and features a 3.6 horsepower, 12 Volt DC Series Wound motor ensuring superior performance.

  • Designed to facilitate efficient towing
  • Has a reduction planetary gear system ratio of 294:1
• Fulton WS20 0700 Winch Strap with Hook
  
  Fulton Winch Strap with Hook is made from nylon web winch strap with hook, measures 2 inch, 20 feet and 2,600 pounds maximum working load.

  • 2" x 20 ft nylon web winch strap with corrosion resistant hook
  • Maximum working load 2600 lbs. with 3/8" diameter bolt.
• Universal Tow Bar Adjustable Mount Tow Bar Tow Kit with Magnetic Tow Lights
  
  This Tow Bar Kit Includes 5,000lbs Rated Tow Bar with Safety Chains and Mounting Brackets with Hardware and Magnetic Tow Lights! Package Includes: Adjustable Mount Tow Bar 5,000 LB Towing Capacity Heavy Duty Coupler Fit 2" Ball Arm Extension from 24" to 41" Wide Adjustable Arms Universal Fit to Bump...

  • 5,000lbs Rated Adjustable-Mount Tow Bar and Heavy Duty Coupler Fit 2" Ball
  • Brackets and Hardware Included
• Sportsman Series W1000 1000 lb 1/4" x 32' Steel Cable Hand Winch
  
  Sportsman Series 1000 pounds Hand Winch 1/4 inch by 32 foot steel cable, 1 piece cold forged steel pinion, gear and shaft. Parameter gear ratio is 3.4:1. Tough zinc oxide finish resists rust.

  • Parameter gear ratio 3.4:1
  • Tough zinc oxide finish resists rust
• Curt 123390 Class II Receiver Hitch
  
  All Curt hitches feature WeatherTite construction, which prevents rusting from the inside out by sealing the main body of the hitch. The receiver tube has an open back end to allow for easy cleaning and for dirt and moisture to pass through and not get trapped as is common with other brands of hitch...

  • 1-1/4 inch receiver tube opening
  • Gross trailer weights (GTW) and tongue weights (TW) vary by application
• Ultra-Fab Products 48979003 Stacker Jack, (Pack of 2)
  
  Ultra-Fab Products 48979003 Stacker Jack, (Pack of 2)
• Rugged Ridge 15102.03 Black Winch Cover
  
  Rugged Ridge UTV/ATV Winch Cover - Keep your winch looking as good as the day you bought it with the Rugged Ridge winch cover. Constructed from durable vinyl lined fabric the cover drops over your winch and secures with a draw cord.
• 4'' X 30' Green Winch Straps with Flat Hook - Box of 10
  
  This box of ten 4 inch by 30 foot green winch straps contains a heavy duty flat hook that attaches to a flatbed trailer. The winch straps are made of industrial grade, 20,000 lb polyester webbing and will securely tie down your load with any standard 4" winch.

  • Contains ten 4 inch x 30 foot Winch Straps
  • Defender protects strap from wear and tear
• ARB ARB207D Recovery Gear and General Accessories
  
  The importance of D shackles in particular cannot be underestimated for vehicle recovery, indeed for most 4x4s, the D shackle is how you attach the strap to the vehicle. we have a range of D shackles that cater for the largest heavy duty trucks to the smallest SUV.

  • ARB D Shackle 10,640Lb
• Andersen Single Plated Steel Ball - 3455
  
  This is a 50mm Chrome Plated Steel Single Ball with a towing capacity of 3.5 metric tons designed for the Andersen Rapid Hitch ONLY.

  • 50mm Steel Single Ball
  • Zinc Chrome Finish to Reduce Rust